MCB & CB Accessories
Accessories for DLS6 & DMCB2:
- Auxiliary switch
- Shunt trip
- Locking device for DLS6
MCB selection and application MCBs accessories Technical data Download this page - pdf
Ordering reference: see below
DHi - - Auxiliary switch for DLS6 |
Contacts change state when the MCB is switched on or off |
Mounts on the right hand side |
Modules Description Reference |
0.5 1 N/O DHi 3 0.5 1 N/O + 1 N/C DHi 4 0.5 1 N/O + 2 N/C DHi 5 0.5 2 N/O + 1 N/C DHi 6 0.5 1 C/O DHi 7 0.5 2 C/O DHi 8 |
DHi-S - - Fault signalling for DLS6 |
Contacts change state if the MCB trips due to a fault |
Mounts on the right hand side |
Modules Description Reference |
0.5 1 C/O DHi-S10 0.5 1 N/O + 1 N/C DHiS11 |
iiiiiiiiiiiiiiiiiiiii
Hi - Auxiliary switch for DMCB2 |
Contacts change state when CB is switched on or off |
Mounts on the right hand side of CB |
Modules Description Reference |
0.5 1 N/O + 1 N/C DMCB2-Hi1 |
iiiiiiiiiiiiiiiiiiiii
DASA - shunt trip for DLS6 |
Trips the MCB when energised from an external source |
Mounts on the right hand side of the MCB |
Modules Description Reference |
1 Uc AC/DC = 24v DASA-24 1 Uc AC = 230v DASA-230 |
iiiiiiiiiiiiiiiiiiiii
ASA - shunt trip for DMCB2 |
Trips the CB when energised from an external source |
Mounts on the left hand side of the MCB |
Modules Description Reference |
1 Uc AC = 110-415v ASA-1 Uc DC = 110-230v |
iiiiiiiiiiiiiiiiiiiii
Locking device for DLS6 |
Contacts change state if the MCB trips due to a fault |
Mounts on the right hand side |
Description Reference |
Lockable with padlock DEASS (Padlock not supplied) |
iiiiiiiiiiiiiiiiiiiii