Metal enclosures
18th Ed. Consumer units: Tested to meet the requirements of 536.4.201 - Icc 16kA / 230v as per BSEN 61439-3 Annex ZB. Refer to the installation instructions. SPD Selection: Where SPDs are required please refer to 534 4 8 and the SPD Manufacturer's installation instructions. Installing Type 1 SPDs in a consumer unit is difficult - see cabling requirements covered in 534.4.8 Et 10. *Note : SPDs are passive devices and do not add to the heat rise in the enclosure i.e. they only take up space that has been assigned / tested with Doepke components in situ. Leave 0.5 module space between the SPD and adjacent components to prevent direct heat.
- Adaptable and compact for renewable energy installations
- Heat pump consumer units c/w HP Type B RCCB
- Versions available including Type A, F and B
- For other combinations please contact us
- We recommend the use of good quality SPD devices e.g. DEHN
