RCCB as a main switch

18th Ed. Consumer units:
Tested to meet the requirements of 536.4.201 – Icc 16kA / 230v as per BSEN 61439-3 Annex ZB. Refer to the installation instructions.

SPD Selection:
Where SPDs are required please refer to 534 4 8 and the SPD Manufacturer’s installation instructions. Installing Type 1 SPDs in a consumer unit is difficult – see cabling requirements covered in 534.4.8 Et 10.

*Note : SPDs are passive devices and do not add to the heat rise in the enclosure i.e. they only take up space that has been assigned / tested with Doepke components in situ. Leave 0.5 module space between the SPD and adjacent components to prevent direct heat.

Adaptable and compact for renewable energy installations
Heat pump consumer units c/w HP Type B RCCB
Versions available including Type A, F and B
For other combinations please contact us
We recommend the use of good quality SPD devices e.g. DEHN

Order Doepke MCBs/RCBOs separately – Please refer to the web page links:

MCBs 6kA – Rated for conditional short-circuit current < 16kA as per CU installation instructions

RCBOs 10kA – Rated for conditional short -circuit current < 16kA as per CU installation instructions

Selection

RCCB Type A as main switch

Refer to Technical Data for additional information
RCCB 1 Type A	Usable Ways	Reference
63A 30mA	4	DCMR04/063
63A 30mA	8	DCMR08/063
100A 30mA	4	DCMR04/100
100A 30mA	8	DCMR08/100
100A 30mA	12	DCMR12/100
100A 30mA	16	DCMR16/100
100A 30mA	22	DCMR22/100
100A 30mA	26	DCMR26/100

Accessories

RCCB as a main switch

RCCB Type A as main switch

Neutral/earth bars

Blanks

Terminals

Busbar – 80a