Split load single RCCB

18th Ed. Consumer units:
Tested to meet the requirements of 536.4.201 – Icc 16kA / 230v as per BSEN 61439-3 Annex ZB. Refer to the installation instructions.

SPD Selection:
Where SPDs are required please refer to 534 4 8 and the SPD Manufacturer’s installation instructions. Installing Type 1 SPDs in a consumer unit is difficult – see cabling requirements covered in 534.4.8 Et 10.

*Note : SPDs are passive devices and do not add to the heat rise in the enclosure i.e. they only take up space that has been assigned / tested with Doepke components in situ. Leave 0.5 module space between the SPD and adjacent components to prevent direct heat.

• Adaptable and compact for renewable energy installations
• Heat pump consumer units c/w HP Type B RCCB
• Versions available including Type A, F and B
• For other combinations please contact us
• We recommend the use of good quality SPD devices e.g. DEHN

Order Doepke MCBs/RCBOs separately – Please refer to the web page links:

MCBs 6kA – Rated for conditional short-circuit current < 16kA as per CU installation instructions

RCBOs 10kA – Rated for conditional short -circuit current < 16kA as per CU installation instructions